How to Remove Pilling From a Sweater by Hand (Without Ruining It)
Short answer: lay the sweater flat, test your tool on a hidden spot, then lift the pills with light strokes in one direction: a fabric shaver or a de-pilling comb for a whole sweater, small scissors for a few pills. Go slow on fine or loose knits. Then wash it inside out and dry it flat so the pills come back more slowly. Last updated: November 16, 2026.
Why sweaters pill (and where)
- Pills are rubbed-up fibers. Fibers break loose, stay anchored at one end and tangle into little balls (Tide). It happens on wool, cashmere, cotton and polyester.
- They grow where the sweater rubs. The Woolmark Company lists the elbows, armpits, sleeves, belly and sides, where the arms keep rubbing the body of the sweater, and long hours sitting at a desk.
- Pilling is not always a defect. Woolmark calls it a complex mix of fiber, yarn and wear, and says nobody can guarantee it will not happen. Longer fibers, a tighter twist and a denser knit pill less.
4 ways to take the pills off
- Electric fabric shaver. Best for a whole sweater, fast. The risk: it needs batteries or charging, and pressing hard can cut the knit.
- De-pilling comb (manual). Best for a sweater, a coat or a sofa cushion. The risk: going too fast can pull a thread.
- Small scissors. Best for a few pills, one by one. The risk: slow, and one slip cuts a hole.
- Pumice "sweater stone" or nail file. Best for thick, sturdy knits. The risk: it is abrasive and can wear thin fibers.
What the published tests found: Gentleman's Gazette tested nine tools on a 100% wool sweater and rated the electric fabric shaver and a simple nail file 10/10. Reviewed's tester cleared a sweater in about five minutes with a sweater comb, and also made a small snag by going too quickly. Woolmark says a comb works but must be used very gently.
Step by step (by hand)
1. Lay the sweater flat on a table, smooth, with no folds under the area you work on (Tide).
2. Test on a hidden spot first: the inside hem or the inside of a cuff. If a thread lifts, switch to scissors or a shaver.
3. Hold the fabric taut with your free hand, next to where you work.
4. Use light, short strokes in one direction. Let the tool lift the pill; do not press the knit into it.
5. Stop on loose loops and seams. Work around them, not over them.
6. Finish with a lint roller or tape to pick up the loose fuzz, then shake the sweater out.
How to slow pilling down
- Turn it inside out before washing, and use a gentle cycle or hand wash (Tide, Woolmark).
- Skip fabric softener on wool (Woolmark).
- Air dry it flat instead of the dryer (Tide).
- De-pill early, after drying and before the pills get big: Woolmark suggests doing it routinely.
The remover we sell, with its honest gaps
- The Telescopic Fabric Pill & Lint Remover: US$ 15.99 final price, free US shipping, no sales tax added.
- A manual pill and lint remover: a closed plastic capsule with a metal comb and a spring inside. Pull the top and the comb comes out; let go and it slides back in, so it does not snag in a drawer or a bag.
- No battery, no charging, no motor. It works any time, and it also takes lint off coats, sofa cushions and plush toys.
- Size: about 2.4 × 2.6 × 6.3 in (6 × 6.7 × 16 cm), as the maker states it.
- It is slower than a shaver. A big sweater takes a few minutes of strokes.
- The metal comb can pull a thread on fine or loose knits. Test it on a hidden spot first, as in step 2.
- Not checked yet: our own hands-on test of a sample on a fine knit. It is marked pending in the report, and it is new at Tavrov with no buyer reviews yet.
- Skip it if most of your sweaters are very fine cashmere or loose, open knits: small scissors are safer there.
The one we sell: Telescopic Fabric Pill & Lint Remover · US$ 15.99 · ships from a US warehouse in 3–8 days · read the open Tavrov report first
FAQ
How do I remove pilling from a sweater by hand?
Lay it flat, test on a hidden spot, hold the fabric taut and lift the pills with light strokes in one direction using a de-pilling comb or a fabric shaver. For a few pills, cut them off one by one with small scissors.
Why does my sweater pill?
Rubbing breaks fibers loose and they tangle into balls. Woolmark says it happens most at the elbows, armpits, sleeves and sides, where the sweater rubs itself or a desk.
Is a fabric shaver or a comb better?
A shaver is faster on a whole sweater but needs power. A manual comb needs no battery but can pull a thread if you go too fast. Both need light pressure and a test on a hidden spot.
Can I use a razor or a pumice stone?
Tide lists a razor blade and a pumice stone, and Gentleman's Gazette rated a nail file highly, but abrasive and bladed tools can cut or thin the knit. Use light strokes and keep them for sturdy knits.
How do I stop pilling from coming back?
Wash the sweater inside out on a gentle cycle, skip fabric softener on wool, dry it flat and remove pills early. Woolmark notes pilling can be slowed but never fully prevented.
Sources